MAXIOL > Crowdfunding: assembly Cartridges Carnivore 2

Помощь - Поиск - Пользователи - Календарь

Полная версия: Crowdfunding: assembly Cartridges Carnivore 2

MAXIOL > Техника > Компьютеры и программы > MSX

SuperMax

12.5.2020, 13:42

Sufficient number of orders collected
and ordering components for the assembly of cartridges

Most components are currently in delivery.

However they are already starting to arrive- currently delivered:
1. cartridge cases
2. M93C46

SuperMax

14.5.2020, 16:25

Component delivery status of May 14, 2020

Нажмите для просмотра прикрепленного файла

delivery status transition sequence: 1->2->3->4->5->6

SuperMax

15.5.2020, 0:34

SuperMax

15.5.2020, 10:58

Component delivery status of May 15, 2020

Нажмите для просмотра прикрепленного файла

SuperMax

17.5.2020, 14:41

Component delivery status of May 17, 2020

Нажмите для просмотра прикрепленного файла

perhaps you noticed that in the first diagram 18% of the components were in China, and then this sector grew to 26%, this is due to the fact that the items were assigned numbers and now we can track their location. In other words, there are more counted items.

SuperMax

19.5.2020, 11:34

Component delivery status of May 19, 2020

Нажмите для просмотра прикрепленного файла

SuperMax

26.5.2020, 20:37

Component delivery status of May 26, 2020

Нажмите для просмотра прикрепленного файла

Important change!
printed circuit boards were able to cross the border and are already in Yekaterinburg.

SuperMax

28.5.2020, 21:26

Component delivery status of May 28, 2020
Нажмите для просмотра прикрепленного файла

SuperMax

30.5.2020, 13:14

Component delivery status of May 30, 2020
Нажмите для просмотра прикрепленного файла

SuperMax

4.6.2020, 18:32

Component delivery status of June 3, 2020
Нажмите для просмотра прикрепленного файла

SuperMax

5.6.2020, 11:22

Component delivery status of June 5, 2020
Нажмите для просмотра прикрепленного файла

SuperMax

8.6.2020, 11:16

Component delivery status of June 8, 2020

Нажмите для просмотра прикрепленного файла

SuperMax

11.6.2020, 15:13

Component delivery status of June 11, 2020
Нажмите для просмотра прикрепленного файла

SuperMax

11.6.2020, 15:16

PCB photo

Нажмите для просмотра прикрепленного файла

SuperMax

12.6.2020, 18:07

Great news!
The assembled experienced controller has been tested.
The sound quality meets the requirements of the copyright holder.
start assembling the cartridges.

SuperMax

23.6.2020, 11:36

I will write a status

1. the assembly is in progress, in principle, the speed of 650-750 small SMD elements per day has been reached, I plan to finish those weeks
and if there are no surprises in the form of a pile of dead FPGAs or memory, then next week we will start sending out
2. Holes: I moved the connector to the other side. It turns out well - the hole is only in one half of the body.
Now one office has made test holes, but this is not ideal. we connect 2 more offices, let's see what happens.
3. Sticker in the final stage of development, in the near future I will post the most interesting options for voting

SuperMax

24.6.2020, 11:52

Component delivery status of June 24, 2020
Нажмите для просмотра прикрепленного файла

Yes, not all components are delivered yet.
waiting for RAM CY62167DV30

I had a small supply for the test, but the bulk are unfortunately still being delivered.

SuperMax

27.6.2020, 18:13

While RAM is still being delivered
the assembly is nearing the end

Unfortunately this week there will be no complete assembly - but several boards are already completely ready

on Monday we will solve the issue of milling holes in the cases

start voting for the sticker on Monday too

build status photo
Нажмите для просмотра прикрепленного файла

successfully tested circuit board washing with alcohol and ultrasonic bath

SuperMax

29.6.2020, 19:34

good news:
The third locksmith organization managed to milling one case.

Now they have begun to make copies - by the end of the week they’ll do

we prepare the pictures - the final touches (it took more time, the shopping mall decided to do everything with the highest quality)

also choose a printing company that prints stickers (maybe it will be a good sticker, with lamination, not a simple photo paper)

SuperMax

30.6.2020, 0:02

Sticker vote announced!
Only those who paid for cartridge production will vote

to vote you must enter the forum
login credentials will be sent to your email tomorrow, since today I don't have time - i live in UTC+7
and I have to go to sleep

Vote for sticker options for Russian Carnivore2

SuperMax

30.6.2020, 11:51

To vote, you must enter the forum with your credentials

Unfortunately, the forum interface is Russian, and I will make tips so that no one gets lost.

To enter, click here, this is Login
Нажмите для просмотра прикрепленного файла

then enter your login and password in these fields
Нажмите для просмотра прикрепленного файла

it should look like
then press the button below
Нажмите для просмотра прикрепленного файла

after entering, go to the voting page and vote
Нажмите для просмотра прикрепленного файла

for example, select the sticker option
and click the button below

if you have any difficulties - ask questions by email

SuperMax

2.7.2020, 23:23

to summarize
all cases are prepared - holes are cut out
boards assembled 51pcs
47pcs workers, the rest will bring later
40 pinned by founders

losses
- 3 cases ruined when cutting
- 12pcs dead CY62167DV30
- 14pcs dead M29W640GB
- 3pcs dead FPGAs EP2C5Q208C8
if it weren't for dead chips, it would be much easier

the winner picture is clear - №8 - this is the work of the Perm artist (bear outline) and my wife's collages
photo is used as background - Aurora Over The Trees Of Churchill Manitoba by David Marx
use agreed with the author and the sticker itself
I highly recommend visiting the site of the author of the photo and his instagram
https://www.davidmarx.com/
https://www.instagram.com/davidmarxphoto/

Now I'm waiting from Wierzbowsky a new version of the firmware is expected - in order to fill it already

accordingly, I'll have to repeat the tests, but I think that next week we'll start sending out cartridges.
sending out will be carried out in the strict manner of receiving payment.

if you have not previously paid for delivery - get ready to pay promptly!

SuperMax

5.7.2020, 13:54

a little bit about cartridge assembly
Нажмите для просмотра прикрепленного файла

SuperMax

5.7.2020, 13:55

Soldering cartridge carnivore2

This is the first experiment to record video. the focus of the camera does not match the focus of the microscope eyepieces very well.

SuperMax

11.7.2020, 17:12

tentatively next week shipping begins

after sending you will receive a package tracking number

important!
I ask you to track the parcel regularly and if it gets stuck somewhere for more than 7 days, inform me, I will make an application for the search for the parcel.

This is a kind of hack of the postal service - after the application for the search, the parcels are immediately accelerated.

SuperMax

17.7.2020, 12:01

Hello!
finally got the perfect sticker!

initially we tried to make a paper sticker with lamination, however, tests of the sticker showed that the paper base is still sensitive to moisture and the result does not correspond to our desire to make quality.
Then they made a sticker on OraJet plastic film - the result is excellent, but I had to do a lot of iterations with adjusting the dimensions, especially for the CF slot.
Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла

All is ready! we start distribution according to the order of receipt of funds!

SuperMax

17.7.2020, 19:48

Photo of a printed circuit board assembly

i think it would be correct to make some clarifications

1.As you can see, the audio connector has been moved to the other side of the PCB to reduce the complexity of milling the cartridge case.

2. I'm sure you will notice that almost all tantalum capacitors have been replaced with ceramic capacitors.
reasons for replacing two
- in the sound circuit, correctly place non-polar capacitors . 4 pieces of tantalum 4.7μF 25V are replaced with ceramic non-polar SAMSUNG 4μF 50V.
- in power circuits, ceramic capacitors are preferable, since they have a lower internal resistance. in fact, in ordinary life, tantalum capacitors or other oxide capacitors are blocked by ceramic to reduce resistance at high frequency. I have the opportunity to supply ceramic capacitors right away - I develop other boards and order ceramic capacitors in bulk and such a replacement is not expensive.

All these replacements are made with only one goal - to achieve maximum product quality!

Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла

SuperMax

17.7.2020, 23:28

Ready to pack for send

Нажмите для просмотра прикрепленного файла

SuperMax

24.7.2020, 10:29

Hello!
Sending orders in progress, by the end of next week we will finish for sure
Half of the packages have already been sent.

I repeat:
after sending you will receive a package tracking number
I ask you to track the parcel regularly and if it gets stuck somewhere for more than 7 days, inform me, I will make an application for the search for the parcel.

This is a kind of hack of the postal service - after the application for the search, the parcels are immediately accelerated.

Reminder for everyone - important links
Carnivore2 User Guide English version
Инструкция по эксплуатации Carnivore2 Русская версия

SuperMax

27.7.2020, 11:29

Status of July 25, 2020

Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла

SuperMax

30.7.2020, 12:29

I think you will be interested in how the cartridges are packed

packaging technology:
first it is packed in a branded bag

then some bubble wrap + strong box

to understand the size of the package, I put another cartridge on top

here is another cartridge next to it, too, to understand the thickness of the package

Carnivore2 cartridge weighing only 80 grams
with packaging, it weighs 170 grams - those 90 grams of packaging material

then it goes into the mail package

SuperMax

9.8.2020, 14:00

Status of August 9, 2020

Нажмите для просмотра прикрепленного файла
Нажмите для просмотра прикрепленного файла

SuperMax

26.8.2020, 1:29

Status of August 26, 2020

SuperMax

31.8.2020, 22:11

Status of August 31, 2020

SuperMax

13.1.2023, 18:56

Orders and Shipping

We accept paypal payment
The cost of a Carnivore2 by MAXIOL cartridge is $110 if paid as a friend.
when paid as a product $120
(cost not includes delivery)

To order, write a letter to radioshop@maxiol.com
The letter must indicate
- cartridge body number - the first message contains numbering.
- number of cartridges Carnivore2 by MAXIOL
- full mailing address for shipment

will come in response
- estimated shipping date
- payment method

reply is sent within 1 day, if you have not received a reply - check your spam folder.

If you have any questions, you can ask them by writing us a letter to radioshop@maxiol.com

Это текстовая версия — только основной контент. Для просмотра полной версии этой страницы, пожалуйста, нажмите сюда.